FixVault
Home › GMC › 2022 › Hummer EV › Repair and Diagnosis › Body & Frame › Seats › Seat Heating And Cooling › Repair Instructions › Rear Seat Heater Control Module Replacement › Removal Procedure

Removal Procedure

  1. GM5034921

    Rear Seat Back Cushion (2) - Remove - Rear Seat Back Cushion Removal and Installation

  2. GM5661280

    Position the rear seat cushion (1, 2) as necessary to access the J-channel retainers.

  3. Disengage the J-channel retainers from the seat cushion frame.
  4. Unzip the two zippers on the bottom of the seat cushion cover.
  5. Disconnect the electrical connector.
  6. Remove the rear seat cushion cover (1) and rear seat cushion pad (2) as an assembly.
  7. GM5048445

    Disconnect the electrical connectors.

  8. Release the retaining tabs.
  9. Rear Seat Heater Control Module (1) - Remove
About FixVault