Component Testing

Ignition OFF, disconnect the harness connector at the A22 Radio Control.
Test for infinite resistance between the signal terminal 10 and the ground terminal 1 with the switch in the open position.
- If less than infinite resistance
  Replace the A22 Radio Control.
- Go to next step: If infinite resistance
Test for less than 2 Ω between the signal circuit terminal 10 and the ground terminal 1 with the switch in the closed position.
- If 2 Ω or greater
  Replace the A22 Radio Control.
- Go to next step: If less than 2 Ω
All OK.