FixVault
Home › GMC › 2023 › Canyon AT4 › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.7L - Repair Instructions › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove underbody panels as necessary. Underbody Panel Component Locator
  2. GM6137460Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector.

  3. Crankshaft Position Sensor Bolt (1) - Remove
  4. Crankshaft Position Sensor (2) - Remove
About FixVault