FixVault
Home › GMC › 2023 › Canyon AT4 › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.7L - Repair Instructions › Repair Instructions › Fuel Pump Power Control Module Replacement › Installation Procedure

Installation Procedure

  1. GM6144682Courtesy of GENERAL MOTORS COMPANY

    Fuel Pump Power Control Module (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Fuel Pump Power Control Module Nut (1) - Install and tighten [2x] - Fastener Specifications
  3. Connect the electrical connector.
  4. Install the spare tire.
  5. Remove the support and lower the vehicle.
About FixVault