FixVault
Home › GMC › 2023 › Hummer EV Edition 1 › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Repair Instructions › Windshield Frame Weatherstrip Replacement › Removal Procedure

Removal Procedure

  1. GM5823884Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Pull down on the roof lift off pane/window latch (1) and rotate latch outward on both sides of the vehicle.

  2. GM5823888Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Pull down on the roof lift off pane/window rear latch (1) and rotate latch outward on both sides of the vehicle.

  3. GM5823889Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Lift the side of the roof lift off window (1) to disengage the removable top locating pin (2) on both sides of the vehicle.

  4. GM5823891Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Left side shown, right side similar.
    • Observe the location of the rubber grommets mounted around the removable top locating pin access holes. The grommet may be uninstalled when the roof lift off window is removed. Ensure the grommet is properly mounted before installing the roof lift off window.

    Slide the roof lift off window (1) outward to disengage the roof lift off panel/window rear locating pins (2) on both sides of the vehicle.

  5. Remove left and right side roof lift off windows (1) and place on a cleaned prepared surface.
  6. GM5832341Courtesy of GENERAL MOTORS COMPANY

    Center Roof Lift Off Panel Nut (1) - Remove [4x]

  7. GM5832364Courtesy of GENERAL MOTORS COMPANY

    Center Roof Lift Off Panel (1) - Remove

  8. GM5775549Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Using a flat-bladed plastic trim tool, release the retaining clips on both sides of the vehicle.

  9. Instrument Panel Outer Trim Cover (1) - Remove [2x]
  10. GM5775858Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Reposition the weatherstrip as necessary.

  11. Use a flat-bladed plastic tool to disengage the retaining clip at the top of the body hinge pillar garnish molding (1) on both sides of the vehicle.
  12. Body Hinge Pillar Garnish Molding (1) - Remove [2x]
  13. GM5775868Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Use a flat bladed plastic tool to disengage the windshield pillar assist handle covers (1) from the windshield garnish molding on both sides of the vehicle.

  14. Windshield Pillar Assist Handle Cover (1) - Remove [4x]
  15. Windshield Pillar Assist Handle Bolt (2) - Remove [4x]
  16. GM5775880Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Using a flat-bladed plastic trim tool, release the retaining clips on both sides of the vehicle.

  17. Windshield Garnish Molding (1) - Remove [2x]
  18. Disconnect the electrical connectors.
  19. GM5810520Courtesy of GENERAL MOTORS COMPANY

    Insert a suitable flat-bladed plastic trim tool between the windshield multifunction sensor mount bracket cover insert (1) and windshield multifunction sensor mount bracket cover.

  20. Separate the windshield multifunction sensor mount bracket cover insert (1) from the windshield multifunction sensor mount bracket cover.
  21. Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove
  22. GM5810458Courtesy of GENERAL MOTORS COMPANY

    Using a suitable plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover (1) to release it from the windshield.

  23. Pull downward to remove the windshield multifunction sensor mount bracket cover (1) from the windshield.
  24. GM5764790Courtesy of GENERAL MOTORS COMPANY

    Open the sunshade support bolt access cover with an appropriate tool on both sides of the vehicle.

  25. Sunshade Support Bolt (1) - Remove [2x]
  26. Using the appropriate tool, release the metal sunshade support retainers on both sides of the vehicle.
  27. Sunshade Support (2) - Remove [2x]
  28. GM5801475Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Windshield Upper Garnish Molding Clip (1) - Remove [4x]

  29. GM5775707Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Sunshade Retainer Bolt Cover (1) - Remove [2x]

  30. Sunshade Bolt (2) - Remove [6x]
  31. Squeeze the tabs at the base of the sunshade (3) to detach it from the windshield inner frame assembly and allow the windshield upper garnish molding with the sunshade attached to be lowered on both sides of the vehicle.
  32. GM5777020Courtesy of GENERAL MOTORS COMPANY

    Windshield Upper Garnish Molding (1) - Remove

  33. Disconnect the electrical connectors.
  34. Release the retainer attaching the sunshade to the windshield upper garnish molding (1) on both sides of the vehicle.
  35. Sunshade - Remove [2x]
  36. GM5831092Courtesy of GENERAL MOTORS COMPANY

    Use a grease pencil to mark the location of the roof lift off panel/window front striker (2).

  37. Roof Lift Off Panel/Window Front Striker Bolt (1) - Remove [2x]
  38. Roof Lift Off Panel/Window Front Striker (2) - Remove
  39. GM6186846Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Windshield Frame Weatherstrip Bolt- Left Side and Right Side (1) - Remove [4x]

  40. GM6186847Courtesy of GENERAL MOTORS COMPANY

    Using a suitable tool, remove the retainers as necessary.

  41. Starting at one end of the windshield frame weatherstrip (1) pull out and away from the body.
  42. Windshield Frame Weatherstrip (1) - Remove
About FixVault