Installation Procedure
Trailer Brake Control Module (1) - Install
- Trailer Brake Power Control Module Nut (2) - Install and tighten [2x] - Fastener Specifications
Electrical Connector (1) @ Trailer Brake Control Module - Connect
- NOTE:
Left side shown, right side similar.
Rear Wheelhouse Liner- Right Side (3) - Install
- Rear Wheelhouse Liner Bolt- Right Side (1) - Install and tighten [3x] - Fastener Specifications
- Rear Wheelhouse Liner Retainer- Right Side (2) - Install
- NOTE:
Left side shown, right side similar.
Rear Tire Front Air Deflector- Right Side (2) - Install
- Rear Tire Front Air Deflector Bolt- Right Side (1) - Install and tighten [3x] - Fastener Specifications
- Install the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution .