FixVault
Home › Genesis › 2017 › G80 3.8, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Timing System - 3.8L › Timing Chain Cover › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the lower oil pan.

    (Refer to Lubrication System - "OIL PAN ")

  2. Drain the coolant.

    (Refer to Cooling System - "COOLANT ")

  3. Remove the air cleaner assembly.

    (Refer to Intake And Exhaust System - "AIR CLEANER ")

  4. Remove the surge tank.

    (Refer to Intake And Exhaust System - "SURGE TANK ")

  5. Remove the intake manifold.

    (Refer to Intake And Exhaust System - "INTAKE MANIFOLD ")

  6. Remove the LH/RH cylinder head cover.

    (Refer to Cylinder Head Assembly - "Cylinder Head Cover ")

  7. Remove the drive belt.

    (Refer to Timing System - "DRIVE BELT ")

  8. Remove the idler.

    (Refer to Timing System - "IDLER ")

  9. Remove the drive belt auto tensioner.

    (Refer to Timing System - "DRIVE BELT TENSIONER ")

  10. Remove the oil filter body.

    (Refer to OIL FILTER BODY Lubrication System )

  11. Remove the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT DAMPER PULLEY ")

  12. Remove the water pump.

    (Refer to Cooling System - "WATER PUMP ")

  13. Remove the timing chain cover (A).
    G11354370Courtesy of
    CAUTION: Be careful not to damage the contact surfaces of cylinder block, cylinder head and timing chain cover.
About FixVault