Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the connector (A), and then remove the sensor (B).
NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

[Bank 1/Sensor 1]

Courtesy of

Courtesy of

[Bank 1/Sensor 2]

Courtesy of

Courtesy of

[Bank 2/Sensor 1]

Courtesy of

Courtesy of

[Bank 2/Sensor 2]

Courtesy of

Courtesy of