FixVault
Home › Genesis › 2017 › G80 3.8, AWD › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module & Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the engine OFF.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ASSEMBLY ")

  4. Pull up the lock of the SRSCM connector to disconnect the connector (A and B).
    G11340130Courtesy of
  5. Remove the SRSCM mounting bolts (3EA) from the SRSCM, then remove the SRSCM.
CAUTION: You must remove or install the SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment.
About FixVault