FixVault
Home › Genesis › 2017 › G80 3.8, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Injector Drive Box › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the ECM & TCM & IDB bracket.

    (Refer to Engine Control System - "ECM ")

  3. Disconnect the TCM (B) from the bracket after loosening mounting bolt (A).
    G11354989Courtesy of
  4. Disconnect the IDB (B) from the bracket after loosening mounting bolt (A).
G11354990Courtesy of
G11354991Courtesy of
About FixVault