FixVault
Home › Genesis › 2017 › G80 5.0 Ultimate › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System - 5.0L › Fuel Line › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Disconnect the fuel feed tube quick-connector (A).
  4. Disconnect the vapor hose (B) which is connected from the PCSV.
    G11336775Courtesy of
  5. Remove the front-LH wheel, tire and the inner wheel house.
  6. Remove the fuel line protector (A) after removing mounting nuts.
    G11336776Courtesy of
  7. Disconnect the front vapor and fuel tube line quick-connector (A).
    G11336777Courtesy of
  8. Remove the noise barrier (A) after loosening the mounting bolt and nut.
  9. Remove the front vapor and fuel tube line (B).
    G11336778Courtesy of
  10. Remove the fuel tank.

    (Refer to Fuel Delivery System - "FUEL TANK ")

  11. Remove the vapor tube and fuel feed tube line fixing clips (A) by using a common driver.
    G11336779Courtesy of
  12. Remove the fuel line from the bottom of the vehicle.
G11336780Courtesy of
About FixVault