FixVault

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air-bag module from the steering wheel.

    (Refer to DRIVER AIRBAG (DAB) MODULE AND CHECK SPRING Restraint )

  3. Remove the cover (A) after loosening the screw.
    G11354910Courtesy of
  4. Disconnect the cruise control switch connector.
  5. Remove the cruise control switch mounting screws (A).
    G11354911Courtesy of
  6. Remove the cruise control switch (A).
G11354912Courtesy of
G11354913Courtesy of