Repair Procedures: Inspection
WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Troubleshooting for Speaker
- Basic inspection of speaker
Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector is connected precisely to eliminate vibration transmitted from body trims and surrounding parts.
- Troubleshooting by Case
No. Case Inspection/Remedy 1 Trembling sound - Before replacing the speaker, inspect that the mounting screws are installed properly.
- After re-installing the speaker, verify that no trembling sound is heard.
- When a trembling sound is heard again, replace the speaker with new one.
2 Noise - Check if the wiring connector is connected properly. If not, reconnect the wiring connector.
- In case of radio static, check if there is a noise from CD player.
- When a noise is heard on turning radio on, replace the speaker with a new one.
NOTE: If the noise is related to radio static only, this must be coming from poor radio reception. In this case, there is no need for repair or replacement.3 Poor performance Inspection of the wiring connection between the battery and the speaker - Before replacing the speaker, inspect the wiring and connections in the speaker circuit.
- Check the supplying power to the speaker and the resistance, and then inspect the sound quality.
- If the speaker works poorly, replace it with a new one.
CAUTION:- During dealing of speaker
- Dropping or rough handling of the speaker can cause damage.
- Be careful not to cover water and oil over the speaker.
- Caution when dealing with speakers as the diaphragm is made of paper and can be easily torn by impact and external force.
- When modifying audio system as customer pleases, this does electric damage to speaker.
- And, in this case the speakers are not covered by the manufacturer's warranty.
- Basic inspection of speaker