FixVault
Home › Genesis › 2017 › G90 3.3T Premium, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.3L › RCV Control Solenoid Valve › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the RCV control solenoid valve connector (A) and vapor hose (B).
  3. Remove the RCV control solenoid valve (D), after loosen the bolts (C).
Fig 1: RCV Control Solenoid Valve, Connector, Installation Bolts And Vapor Hose
G11412246Courtesy of HYUNDAI MOTOR AMERICA
About FixVault