| DTC Strategy |
|
- Poor connection
- leak or clog in intake air system
- Injector
- Fuel pressure
- B1/S1
|
| Enable Conditions |
- Sensor ceramic temperature is higher than 640°C (1112°F)
- Engine Coolant Temperature is higher than 35°C (95°F)
- Purge active time is higher than 5 sec
- Exhaust Gas temperature is higher than 400°C (752°F)
- Engine speed is between 1320 RPM and 2520 RPM.
- Engine load is between 25% and lower than 60%.
- Fuel cut off
- Fuel feed back control active
|
| Threshold value |
- Ratio of expected area to actual area is lower than 0.35.
|
| Diagnosis Time |
|
| MIL ON Condition |
|