FixVault
Home › Genesis › 2017 › G90 5.0 Ultimate, AWD › Repair and Diagnosis › External Pages › Different car › Section 16 (Power Trunk Module) › Power Trunk Open/Close Switch › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side crash pad switch assembly.
  2. Install the crash pad lower panel.
  3. Connect the negative (-) battery terminal.
About FixVault