Repair Procedures: Removal: Notes
WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures described previously.
- Before disconnecting the front impact sensor connector, disconnect the front airbag connector (s).
- Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Remove the radiator assembly.
(Refer to Engine Mechanical System - "RADIATOR ")
- Disconnect the front impact sensor connector (A), and them loosen the nuts to remove the front impact sensor (B).