FixVault
Home › Genesis › 2017 › G90 5.0 Ultimate, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "INTAKE & EXHAUST SYSTEM - 5.0L ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
    Fig 1: Disconnecting ETC Module Connector
    G11404342Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the installation bolts (A), and then remove the ETC module (B) from the engine.
    Fig 2: Removing ETC Module From Engine
    G11404343Courtesy of HYUNDAI MOTOR AMERICA
About FixVault