FixVault
Home › Genesis › 2018 › G80 3.8, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Installation

Repair Procedures: Installation

CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur if the component drops. If the component drops inspect it before installation.
CAUTION:
  • Insert the sensor in the installation hole and be careful not to damage during installation.
  1. To install, reverse the removal procedure.

    Crankshaft Position Sensor Installation Bolt: 

    6.9 - 9.8 N.m (0.7 - 1.0 kgf.m, 5.1 - 7.2 lb-ft)

About FixVault