FixVault
Home › Genesis › 2018 › G80 3.8, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    NOTE:
    • Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

    [Bank 1/Sensor 1] 

    G12657637Courtesy of HYUNDAI MOTOR AMERICA
    G12657638Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 1/Sensor 2] 

    G12657639Courtesy of HYUNDAI MOTOR AMERICA
    G12657640Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2/Sensor 1] 

    G12657641Courtesy of HYUNDAI MOTOR AMERICA
    G12657642Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2/Sensor 2] 

    G12657643Courtesy of HYUNDAI MOTOR AMERICA
    G12657644Courtesy of HYUNDAI MOTOR AMERICA
About FixVault