FixVault
Home › Genesis › 2018 › G80 3.8, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Variable Force Solenoid (VFS) › Repair Procedures › Removal › Variable Force Solenoid (VFS) [Bank 1/Intake]

Variable Force Solenoid (VFS) [Bank 1/Intake]

  1. Turn ignition switch OFF and disconnect the negative (-) battery terminal
  2. Disconnect the VFS connector (A).
  3. Remove the mounting bolt (B), and then remove the VFS from the engine.
    G12657700Courtesy of HYUNDAI MOTOR AMERICA
About FixVault