Repair Procedures: Disassembly

Information 

• When compressing the coil spring, be cautious as there may be corrosion due to damage to the coil spring painting. In order to avoid such painting damage, compress by putting over the waste hose, etc. (Refer to the image below.)

  Courtesy of HYUNDAI MOTOR AMERICA

1. Compress the coil spring with a strut spring compressor. Do not compress the spring excessively.
2. Remove the lock nut (B) after removing the cover (A).

   Tightening Torque: 

   24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 14.5 ~ 18.1 lb-ft)

   Courtesy of HYUNDAI MOTOR AMERICA

3. Gradually turn the bolt on the spring compressor to slowly release the tension from the spring. Then, disconnect the components.
4. Reassembly is in the reverse order of disassembly.
   CAUTION:

   • Do not reuse the self locking nut.
   • When compressing the coil spring, place the hook to have bilateral symmetry.

     Courtesy of HYUNDAI MOTOR AMERICA

   • If the centerline of the shock absorber does not align with the coil spring, push the shock absorber to align the centerline.

     Courtesy of HYUNDAI MOTOR AMERICA