FixVault
Home › Genesis › 2018 › G80 3.8, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission Control System (SBC) - 3.8L › Output Speed Sensor › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Check signal waveform of output speed sensor using the GDS.

    Specification:  Refer to "Signal WaveForm" procedure below.

    f < 1000Hz D
    G12657915Courtesy of HYUNDAI MOTOR AMERICA
    R
    G12657916Courtesy of HYUNDAI MOTOR AMERICA
    f > 1000Hz D
    R
    G12657917Courtesy of HYUNDAI MOTOR AMERICA
    Pulse
    Width    		 t1 (D): 60μs (50 - 70us)
    t2 (R): 120μs (102 - 138us)
    t3: 30μs (24 - 36us)
About FixVault