FixVault
Home › Genesis › 2018 › G80 3.8, RWD › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Driver Crash Pad Lower Panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the start/stop button (A) from the center fascia garnish after loosening the mounting clip.
    G12659156Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the start/stop button connector.
About FixVault