FixVault
Home › Genesis › 2018 › G80 5.0 Ultimate, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1]

[Bank 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.

    [Bank 1/Intake] 

    G12661581Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 1/Exhaust] 

    G12661582Courtesy of HYUNDAI MOTOR AMERICA
About FixVault