FixVault
Home › Genesis › 2018 › G80 5.0 Ultimate, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    G12661575Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the sensor (B) after removing the installation bolt (A).
    G12661576Courtesy of HYUNDAI MOTOR AMERICA
About FixVault