FixVault
Home › Genesis › 2018 › G80 5.0 Ultimate, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Engine Coolant Temperature Sensor (ECTS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the Engine Coolant Temperature Sensor Connector (A), and then remove the Engine Coolant Temperature Sensor (B).
    G12661570Courtesy of HYUNDAI MOTOR AMERICA
  3. Supplement the Engine Coolant.

    (Refer to Engine Mechanical System - "ENGINE COOLING SYSTEM - 5.0L "

About FixVault