FixVault
Home › Genesis › 2018 › G90 5.0 Ultimate, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 1]

[Bank 1/Sensor 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Remove the rear under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  4. Remove the front muffler [RH].

    (Refer to Engine Mechanical System - "MUFFLER ")

  5. Disconnect the heated oxygen sensor connector (A).
    G12720406Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the heated oxygen sensor (C) with the spanner after lifting.
    G12720407Courtesy of HYUNDAI MOTOR AMERICA
About FixVault