FixVault
Home › Genesis › 2019 › G70 2.0T Advanced, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Cluster Module Diagnosis › DTC B1000-51: Cluster Coding Not Programmed › DTC Information And Inspection › DTC Setting Condition

DTC Setting Condition

Trouble Shooting Condition Possible Cause
Main Action
  • Monitor CAN communication
  1. Discordance with vehicle information
  2. Variant coding procedure not conducted
  3. Faulty SCC/EPB/SRSCM/AFLS/MDPS/4WD/ESP/ESC/TPMS/LKAS/ECS
  4. Faulty C-CAN line
  5. Faulty Check Cluster*
Prerequisite Condition
  • IG key "ON".
Threshold Value Case1
  • Cluster* coding was never conducted
Case2
  • An error occurred in the early stage of cluster coding
Diagnostic Time
  • 2 sec
About FixVault