FixVault
Home › Genesis › 2019 › G70 2.0T Advanced, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis - 2.0L (2 Of 4) › DTC P0564-00: Cruise Control Multi-Function Input A Circuit › Wiring Inspection › Power Circuit Inspection

Power Circuit Inspection

  1. Turn "OFF" the ignition switch. Disconnect 'CRUISE REMOCON SWITCH' connector.
  2. Turn "ON" the ignition switch.
  3. Measure voltage between 'CRUISE MAIN' terminal of 'CRUISE REMOCON SWITCH' harness connector and chassis ground.

    Specification  : 11.5V~13.0V

  4. Is the measured value within specification?

    YES 

    NO 

    • Repair short to ground/open between 'CRUISE MAIN' terminal of 'CRUISE REMOCON SWITCH' harness connector and 'Cruise supply' terminal of ECM harness connector, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
About FixVault