FixVault
Home › Genesis › 2019 › G70 2.0T Advanced, AWD › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module (SRSCM) And Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the engine OFF.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ASSEMBLY ")

  4. Pull up the lock of the SRSCM connector to disconnect the connector (A).
    G13540714Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the SRSCM mounting bolts and then remove the SRSCM (A).
    CAUTION: You must remove or install the SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment.
    G13540715Courtesy of HYUNDAI MOTOR AMERICA
About FixVault