DTC Information: DTC Detecting Condition

Trouble Shooting	Condition	Possible Cause
Main Action	Monitor the pressure when the motor is running at its max (12.5V approved)	Fault inside transfer case (Motor, pump, sensor, etc.)
Prerequisite Condition	Actuate the actuator Start the engine". & run it at 35 Km/h or faster
Threshold Value	The pressure is out of the normal range after running the motor at its max 5 times (normal pressure range: 15~23.5 bar)
Diagnosis Time	Immediately
Fail safe	Inhibit control over the 4 wheels