FixVault
Home › Genesis › 2019 › G70 2.0T Dynamic, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 9 (Engine Control System - 3.3L) › Engine Control Module (ECM) › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the ECM connector (A).
    G13543271Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the ECM bracket assembly (C) after loosening the mounting bolt (A) and nuts (B).
    G13543272Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ECM (B) after loosening the mounting nuts (A).
G13543273Courtesy of HYUNDAI MOTOR AMERICA
About FixVault