FixVault
Home › Genesis › 2019 › G70 3.3T Dynamic, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Control System - 2.0L) › CVVT Oil Temperature Sensor (OTS) › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition.
  2. Disconnect the OTS connector.
  3. Remove the OTS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
  5. Check that the resistance is within the specification.
    Temperature [°C (°F)] Resistance (kΩ)
    -40 (-40) 52.15
    -20 (-4) 16.25
    0 (32) 6.0
    20 (68) 2.45
    40 (104) 1.11
    60 (140) 0.54
    80 (176) 0.29
About FixVault