Repair Procedures: Removal
- Turn ignition switch OFF and disconnect the battery negative (-) terminal.
- Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Remove the cooling fan assembly.
(Refer to Engine Mechanical System - "COOLING FAN ")
- Remove the drive belt.
(Refer to Engine Mechanical System - "DRIVE BELT ")
- Disconnect the alternator B-terminal cable (A) after loosening the mounting nut.
- Remove the alternator (B) after loosening the mounting bolts (A).
- Disconnect the alternator connector (A).
- Remove the alternator.