FixVault
Home › Genesis › 2019 › G90 5.0 Ultimate, AWD › Repair and Diagnosis › External Pages › Different car › Section 104 (Button Engine Start System) › Start Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the start/stop button (A) from the center fascia garnish after loosening the mounting clip.
    G11342729
  4. Disconnect the start/stop button connector.
About FixVault