FixVault
Home › Genesis › 2020 › G80 3.8, AWD › Repair and Diagnosis › Transmission › Transmission Control Systems › 4WD Control Diagnosis › DTC P310D: System Failure - Position During Calibration › DTC Information › DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Position sensor monitoring while learning.
  1. 4WD ECU
Enable conditions
  • Clutch controller normal condition (4WD SW)
Threshold value
  • Position sensor failed at least 4 times during torque control learning
Diagnostic Time
  • Immediately
Fail Safe
  • Restricted 4WD
About FixVault