FixVault
Home › Genesis › 2020 › G80 3.8, RWD › Repair and Diagnosis › Electrical › Body Electrical › Integrated Gateway Power Control Module Diagnosis › DTC C181D-00: CAN Time-Out EVP › DTC Information › DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Conditions For Setting DTC Possible Cause
DTC Strategy
  • Check CAN Communication
  1. Open/short in EVP's P_CAN "High" line
  2. Open/short in EVP's P CAN "Low" line
  3. Faulty EVP
Enable Conditions
  • IG Key "ON"
  • Power Voltage 9~16V
  • P_CAN BUS is normal
Threshold Value
  • EVP's P_CAN message is not received
Diagnostic Time
  • 10 sec
Cancellation Active DTC
  • Erased DTC after solved problem
History DTC
  • Can be erased by GDS
About FixVault