FixVault
Home › Genesis › 2020 › G90 5.0 Ultimate, AWD › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Program (Esp) System › ESP Control Unit › Repair Procedures › Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to Brake System - "ESP SYSTEM BLEEDING ")

  4. Connect the GDS to the data link connector located underneath the dash panel.
  5. Make a selection and operate the process according to the instructions on the GDS screen.
About FixVault