[With ECS]
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the front wheel and tire (A) from the front hub.
Tightening torque:
107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
NOTE:- Be careful not to damage the hub bolts when removing the front wheel and tire.
- Remove the wheel speed sensor connector (A). [2WD]
- Remove the wheel speed sensor bracket bolt from the knuckle. [2WD]
Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
- Remove the wheel speed sensor and cable bracket from the knuckle. [AWD]
Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
- Disconnect the connector (A) and then remove the cable bracket.
[AWD]
[2WD]
- Install in the reverse order of removal.