FixVault
Home › Genesis › 2021 › G70 2.0T, AWD › Repair and Diagnosis › Suspension › Wheel Alignment › Tires/Wheels/Alignment › Wheel › Repair Procedures › Hub Nut Tightening Sequence › Run Out Inspection

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel run-out by using a dial indicator as shown below.
    Run-out Aluminum
    Radial mm (in.) Below 0.3 (0.0118)
    Lateral mm (in.) Below 0.3 (0.0118)
    G13548629Courtesy of HYUNDAI MOTOR AMERICA
  3. If measured value exceeds the standard value, replace the wheel.
About FixVault