FixVault

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
Main Action
  • Level 2 monitoring (=Process monitoring)
  1. Poor connector connection
  2. Faulty ECM
Prerequisite Condition
  • Ignition "ON"
  • Engine speed during engine start is higher than 32 RPM
Threshold value
  • Actual value is higher or lower than allowable range (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
Diagnostic Time
  • 480ms
MIL ON Condition
  • 2 driving cycles