FixVault
Home › Genesis › 2021 › G80 2.5T Advanced, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis - 2.5L (4 Of 6) › DTC P061A-FD: Internal Control Module Torque Performance › DTC Information And Inspection › DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • ECM internal monitoring
  1. Poor connector connection
  2. Faulty ECM
Enable Condition
  • Ignition "ON"
  • Engine speed more than 32 RPM
Threshold Value Case 1
  • If an error is detected during Level 2 monitoring (ADC monitoring)
Case 2
  • If an error is detected during Level 2 monitoring (engine speed, APS, TPS, idle control, torque loss monitoring)
Case 3
  • If an error is detected during Level 2 monitoring (intake air monitoring)
Case 4
  • If an error is detected during Level 2 monitoring (smart assist system operation monitoring)
Diagnostic Time Case 1
  • 0.04 seconds
Case 2
  • 0.48 seconds
Case 3
  • 1 second
Case 4
  • 0.32 seconds
MIL ON Condition
  • 1 driving cycle
About FixVault