Repair Procedures: Installation

Install the IAU unit and then connect the IAU connector.
Install the BLE module and then connect the BLE module connector.
Install the glove box housing cover.
Connect the negative (-) battery terminal.
Perform the "IAU-IBU learning.
(Refer to Hyundai Digital Key System Diagnostic - "IAU-IBU LEARNING AND IAU-BLE MODULE LEARNING PROCEDURES ")
Perform the "IAU-BLE module learning"
(Refer to Hyundai Digital Key System Diagnostic - "IAU-IBU LEARNING AND IAU-BLE MODULE LEARNING PROCEDURES ")
CAUTION:
- You should notify the following items to the customer after completing the vehicle repair.
  - If IAU-IBU learning or IAU-BLE module learning is processed, the existing smartphone key and NFC key card are deleted.
    (In this case, smart key information is not deleted so only smart key can turn on the vehicle.)
  - You should notify that the smart phone key and NFC key card should be re-registered necessarily.
  - To re-register the smart phone key, the digital key initialization of the vehicle owner's smart phone should be processed.
    After initializing the smart phone key, you should re-register the smart phone key.
  - NFC key card should be re-registered and the existing NFC can be re-registered immediately.
    (New card key can be registered and used.)