FixVault
Home › Genesis › 2021 › G90 3.3T Premium, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.3L › Boost Pressure Sensor (BPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the boost pressure sensor connector (A).
  3. Remove the boost pressure sensor after removing the mounting bolts (B).
G14233092Courtesy of HYUNDAI MOTOR AMERICA
About FixVault