FixVault
Home › Genesis › 2021 › G90 5.0 Ultimate, RWD › Repair and Diagnosis › External Pages › Different car › Section 102 (Body Control Module Diagnosis) › DTC B163E-00: Rain Sensor Module LIN Fault › Verification Of Repair › Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2022 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)  " mode.
  2. Erase the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC output again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
About FixVault