FixVault
Home › Genesis › 2021 › GV80 2.5T Advanced, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.5L › Electric Waste Gate Actuator (EWGA) › Repair Procedures › Inspection › Position Sensor

Position Sensor

  1. Turn the ignition switch OFF.
  2. Connect the diagnostic tool on the Data Link Connector (DLC).
  3. Check the output voltage at each position of the EWGA position sensor on current data item within the specification.

    Specification  : Refer to "SPECIFICATION "

About FixVault