FixVault
Home › Genesis › 2021 › GV80 3.5T Advanced › Repair and Diagnosis › Body & Frame › Door Locks › Power Tailgate Module › Anti-Pinch Strip › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the tailgate trim.

    (Refer to Body - "LIFTGATE TRIM ")

  3. Remove the anti-pinch strip sensor connector (A).
    G14724111Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the anti-pinch strip (A) after removing the clips.
    G14724112Courtesy of HYUNDAI MOTOR AMERICA
About FixVault