FixVault
Home › Genesis › 2021 › GV80 3.5T Advanced › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle System Diagnosis › DTC P1C2B-00: OPI Hall Sensor Error › DTC Information And Inspection › DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Troubleshooting Condition Possible Cause
DTC Strategy
  • Current value monitoring
  1. Poor connection
  2. Faulty EOP circuit
  3. Faulty EOP
  4. Faulty TCM
Enable Conditions
  • When entering ISG
Threshold Value
  • Hall sensor voltage is 6 to 17V
  • Hall sensor current is more than 400 mA or less than 0.25 mA
Detecting Time
  • More than 3 sec
MIL ON Condition
  • No MIL On
Fail Safe
  • ISG prohibited
About FixVault