(Steering Wheel Remote Controller Removal And Installation)
Abbreviated Procedures
| Work | H/W | Tightening torque N.m (kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the battery negative (-) terminal | - | - | Diagnostic tool | - | - |
| 2 | Remove the driver airbag (DAB) | - | - | - | - | - |
| 3 | Disconnect the airbag module connector | - | - | - | - | - |
| 4 | Disconnect the steering wheel connector | - | - | - | - | - |
| 5 | Remove the steering wheel | Bolt | 39.2 - 49.0 (4.0 - 5.0/28.9 - 36.2) | - | - | - |
| 6 | Remove the paddle shift switch | Screw | - | - | - | - |
| 7 | Disconnect the paddle shift connector | - | - | - | - | - |
| 8 | Remove the steering lower cover | Screw | - | - | - | - |
| 9 | Disconnect the heated steering wheel connector | - | - | - | - | - |
| 10 | Disconnect the boost mode switch connector | - | - | - | - | - |
| 11 | Disconnect the steering wheel switch connector [LH/RH] | - | - | - | - | - |
| 12 | Remove the steering wheel remote switch | - | - | - | - | - |
|
||||||
| Install in the reverse order of removal | ||||||
|
||||||